One Thousand Eight Hundred and Thirty-Eight Learn From Each Other's Strengths

Opened a new book: The End of the World: My House Can Be Upgraded, Brothers Help Collect, Give Some Recommendations!

*******************

Big Brother thought very well back then, after all, their relationship with some European countries was pretty good at that time.

But who would have thought that the money had already been paid, and the warships were all built.

But when they were waiting for the delivery from France, these Frenchmen were so disrespectful that they directly detained the ship.

It is said that it was because of the obstruction of the beautiful country, which put pressure on the French.

But the question is, don't you French have any ideas?

To be honest, that time really made Big Brother look ashamed, and he was very embarrassing for a while.

Then Big Brother wanted to take the road of self-research. In fact, they still have technical background.

But if you really want to pick up this technology again, it will take a while.

After all, it takes decades to cultivate talents and build a system from scratch, and you simply can't do it.

But the problem is that the security situation of Big Brother's surrounding countries really doesn't have such a long time for them.

Moreover, their national defense research funds are still quite limited, and most of the money has flowed into the equipment research and development of the Air Force and Lu Yuan.

As for the navy, it can only focus on submarines.

As for the surface fleet, we can only use some old guys to make ends meet.

To be honest, although they are old guys from the last century, if you want to talk about the combat strength of these old guys, you must not underestimate them.

But the problem is that some products are too old, and they really need to be updated.

For example, last year, Big Brother's only aircraft mother was ridiculed for a long time because of the boiler problem when it was training in the open sea.

After walking all the way, black smoke rose all the way, and the European and American media mocked that there is no need for radar at all, and it can be seen with research.

Because that's a chimney moving across the sea.

What made the big brother feel even more inferior was that after they came back, they really felt that their aircraft mother was very inferior, and then they planned to send it to the shipyard for renovation and upgrading.

But no one expected that in the process, the shipyard made serious mistakes.

The gantry collapsed, smashed a big hole in the deck of the aircraft mother, and caused a fire, burning the aircraft mother to half...

This result really surprised everyone.

It even made some people in the country jump up and down and laugh non-stop.

In the end, he threatened that the big brother might as well drag the aircraft mother to our shipyard for repairs.

After all, they don't have that strength, and we guarantee that we can repair them quickly and well.

Indeed, in fact, there is nothing wrong with this statement.

If there is any aspect that we are gradually catching up with or even surpassing Big Brother, it is the construction of surface ships.

In recent years, as we have thoroughly grasped Ermao gas turbine technology, and our own technological improvement in ship construction.

We have indeed gradually caught up with Big Brother in the construction of surface ships.

Of course, this only refers to ordinary warships! ~

If you want to talk about the real arsenal ship, then Big Brother can still beat us by eight blocks.

When it comes to this, some people may jump again.

But the problem is, if nothing else, just talk about this Kirov-class cruiser, with a full load displacement of 25,000 tons, nuclear power, and can carry 400 missiles at a time.

Just one ship has the strength to destroy a country, so I ask you whether you accept it or not!

This is the only cruiser in the world, a cruiser that can compete with Yingjiang's fleet of aircraft mothers!

For this reason, Europe and the United States also deliberately gave this kind of warship a name, called a battlecruiser!

As for this ship, we have been drooling and coveting for many years.

Back then we were very close to introducing this battlecruiser.

It's a pity that the beautiful country later stepped in, using the reason of breaking the strategic balance.

Then put pressure in various ways, and finally prevented Big Brother from selling this ship to us.

If we can get this ship, then with our current strength.

Then it won't be 055 who will serve the dumplings now. With this ship, then we really don't have to be afraid of the beautiful country's aircraft mother fleet anymore.

Unfortunately, there is no if...

You must know that one of the key difficulties plaguing our navy now is how to miniaturize the nuclear reactor.

This is also the main reason why we have not built nuclear-powered aircraft carriers and made major breakthroughs in nuclear submarines.

And in this regard, the big brother is the ancestor who played this game!

Everyone, don't think that if we make a breakthrough in gas turbines, we will really surpass or even wipe out the big brother.

That's totally your overthinking.

In fact, even if we have made breakthroughs in gas turbines, it is only in the field of conventional power ship construction that our technology is on par with others.

After all, our best CGT25D gas turbine is actually just the GT25000 gas turbine developed by the former Soviet Union.

This gas turbine was used in the earliest aviation of others, and this gas turbine has already fallen behind internationally.

As early as the beginning of its birth, the performance was not close to the products of Rolls-Royce and GM, and it was about 95% of the skill of the contemporary Eagle Sauce LM2500 model.

But now, compared with the top gas turbines of Yingjiang and Luoluo, the performance is at least 10% worse!

But for Big Brother and some of our surface ships, it is enough for now.

For example, this time, Big Brother introduced our GT250D gas turbine, which is nominally used to pressurize the natural gas station.

But everyone knows that it is actually just to test the level of our gas turbines.

If it really passes the customs, then it will definitely be imported in large quantities from us in the future.

Because there are indeed many batches of surface ships on Big Brother's side, and they all need to be updated.

Although the previous arsenal ships can still be used, many of the other ships with conventional power have been in disrepair for a long time, and it is time to replace them.

For example, Big Brother has built a batch of new missile frigates before, but it has always lacked a suitable gas turbine as a power source.

At first, it was planned to purchase technology from France in the name of shipbuilding.

But who would have thought that the French would release the pigeons.

It would be great if we met us this time.

In the past, to be honest, it didn’t matter how good our products were, but Big Brother was always skeptical.

After all, in the past, people unilaterally exported technology to us, but this time they actually want to buy technology products from us, they will inevitably feel weird in their hearts.

Buy it back and test it first, it's normal.

And once this cooperation is successful, it means that we can finally build a truly equal ordnance dialogue relationship.

In the past, Big Brother exported and transferred technology like us.

And from now on, we may be able to reverse engineer some technologies that Big Brother urgently needs.

For example, in the avionics control system, although the problem with the chip on the Big Brother side has been solved, the LCD screen is still not a strong point.

Who let them put their experience on the electronic tube back then.

The integrated LCD screen that has become popular in recent years has always been the shortcoming of Big Brother!

In this field, we have developed very rapidly in recent years.

The big brother also showed sincerity.

People just want to see how we made the breakthrough in aviation development recently.

After all, they have been curious about this for a long time, and I heard that we have made a major breakthrough in the field of flexible processing?

This made Big Brother even more curious!

Speaking of flexible machining, the concept of finishing has been around for a long time.

But our route is completely different from that of Europe and the United States.

When it comes to flexible finishing, two countries are the best, one is Germany and the other is Switzerland.

Especially Switzerland, their Sterak is definitely the strongest in this respect.

Nothing else, just because their milling heads are so awesome.

As for the milling head, it is definitely the most critical and core component of all five-axis CNC machine tools.

The flexibility and reliability of this thing determine the production efficiency and reliability of a five-axis CNC machine tool.

In flexible processing, it is equivalent to adding a ball bearing that can move in any direction on the milling head.

It allows the milling head to move flexibly in any direction.

We have seen a milling machine in various videos, which turns a large piece of metal into various shapes such as metal skulls after various turning and milling. In fact, it is showing us how people mill heads. flexibility.

Can complete the work of various instructions from all angles.

And to achieve extreme precision, the most important thing is to complete such work on extremely hard special alloy steel workpieces.

What can be tested is by no means as simple as the speed of the milling head. For example, the speed of the milling head of Sterak is only up to 15,000 per minute.

Compared with Japan's Yamazaki, which can exceed 30,000 rotations per minute, and FANUC's machine tools, the data seems to be far behind.

But the problem is that the torque of others is much higher than that of Yamazaki and Fanuc.

This is also the main reason why Yamazaki and FANUC are desperately pursuing the speed.

It's because they can't do other people's torque!

Anyone who is knowledgeable knows what this torque means to the machine tool!

It means strength!

This means that when processing a piece of ultra-high hardness alloy steel, the Swiss Sterak machine tool can easily complete the processing process on this alloy without increasing the speed.